Senin, 03 Juni 2013

Tebis Kallysto

Posted by megah sakti on 22.01 with No comments
Tebis Kallysto
Hier kommt Technik ans Licht

For more information, download this file
 Download Kallysto Technic 3,82 MB
by Call

Modular Automation

Posted by megah sakti on 21.49 with No comments
Modular Automation
Automation and control equipment

D.2 Latching relays - Latching relays auxiliaries
D.4 Relays - Interface relays
D.5 Contactors and override contactors
D.6 Electromechanical time switches
D.8 Analogue time switches 72 x 72mm
D.9 Digital time switches
D.12 Electronic switch clocks
D.13 Time lag switches
D.14 Delay timers
D.15 Pushbuttons - Indicator lights
D.17 Transformers, bells and buzzers
D.18 Thermostats
D.19 Analogue and digital volt-/ammeters
D.21 Selector switches
D.22 Kilowatt hours meters and hours counter
D.23 Dimmers - Master dimmers
D.27 Emergency lighting module - Remote control for emergency light blocks
D.28 Twilight switches
D.29 Light sensitive switch, 2 channel up to 20kLx
D.31 Remote telephone interface
Rp.0,By Call

weatherproof box

Posted by megah sakti on 21.39 with No comments
Rp.350.000 Utk 6 Module

Distribution BOX

Posted by megah sakti on 21.31 with No comments
Box Hager
A.2 Mini Gamma enclosures
A.3 Cosmos and Icos enclosures
A.4 IU metal enclosures
A.5 IP55 enclosures
A.6 Golf enclosures
A.7 Vega mounting enclosures
A.8 Volta flush enclosures
A.9 Orion Plus metal IP65 enclosures
A.11 Orion Plus GRP IP65 enclosures
A.15 Invicta - MCB distribution boards

Orion Plus metal IP65 enclosures

Enclosures with plain door
steel colour RAL 7035
IP 65 / door closed
insulation class : I _
according to IEC 60529
1,5mm thick sheet steel for body and door
These enclosures feature :
_ 2 removable gland plate for cable entry on top and bottom,
_ earth studs on both body and door,
_ door easily removable,
_ plain door equipped with one or two locks with triangular 8mm bit centres, located out of the sealed area.

Options :
_ key lock,
_ wall fixing brackets,
_ plain or perforated mounting plate,
_ equipment kits for modular devices

Orion Plus GRP IP65 enclosures
Enclosure with plain door
Made of glass reinforced polyester (GRP)
Colour : RAL 7035
FL 201B : RAL 7032
Body made out of one piece up to height 800mm
IP 65 / door closed IEC60529
insulation class : II _
according to IEC 61140
These enclosures feature :
_ Plain door equipped with one or two locks with triangular 8mm centres, located out of the sealed area, gasket directly moulded on the door.
_ studs in the back of the enclosure for mounting plate fastening.

Options :
_ key lock,
_ wall fixing brackets,
_ plain or perforated mounting plate,
_ equipment kits for modular devices.
Mulai Rp.135.000-105.000 


Posted by megah sakti on 20.32 with No comments
Automatic Transfer Switch (ATS)

The needs for continuous electrical supply led to the development of a new, compact and highly reliable range of ATS. The HP series ATS is a new generation automatic transfer switch that adopts power changeover operation. It has advantages of simple structure, fast switching (switching time is less than 80 ms) in comparison with traditional contactors or motor-switch. Furthermore, the main contact system is a single pole double throw structure that will not turn on two power supplies at the same time even in the case of emergency.

Scope of use
It is used for emergency power supply system to switch between two power supply, in order to ensure continuous and reliable electrical power to critical loads. It is primarily used in critical installations, for instance, fire protection system, telecommunication, coal mine and shipping, chemical industry and metallurgy, industrial plants, medical and health care, bank and securities exchange, airport, underground express way, military establishment and similar loads that requires non-interrupted and reliable power supply. Function and Characteristic of Automatic Transfer Switch
• With 2 safe and stable position
• Compact and simple switch structure, easy to install
• Ease for operation, with long service life
• Rated current of HP series 4 poles from 32A to 400A

ACB Hager 630 A

Posted by megah sakti on 20.27 with No comments
ACB Hager
Features of Air Circuit Breaker

Air Circuit Breakers are widely used in low voltage power distribution systems of industrial, residential and commercial buildings.  As the main incoming device, Hager ACBs have high dynamic and thermal stability. It not only ensures reliable power distribution, but also protects the installation at high short circuit currents.
Hager ACBs are available from 630 A to 4000 A, in three frame sizes, in breaking capacities of 55kA, 65kA, 80kA & 100kA, Icu = Ics = Icw.

Hager ACBs are equipped with microprocessor based advanced protection controller units, which ensures wide protection range, with adjustment scope, to facilitate all tripping functions and easy operations to users. Hager ACBs allow users to perform all the operations from the front fascia. It helps users to operate buttons, settings, and identify the indications clearly. Hager ACB has two installation types: fixed type and drawout type. With simple tools and accessories, the user can convert one type to another.Draw-out type and Fixed type.


Posted by megah sakti on 20.20 with No comments
MCCB Hager
  • Complies with IEC60947-2 standard
  • Rated current ranges from 16A to 800A
  • With four frame sizes for selection
  • Easy to install and maintain
  • Compact structure, practical functionality
  • Flexible and convenient connection
  • Comprehensive specification, various function, wide application
  • High reliability and safety
  • Number of poles for main  circuit: 3 poles and 4 poles
  • Adjustable 400 and 800 frame electromagnetic release

Harga Mulai Rp.505.000